Adkinson Estate Personal Property Online Only Auction
Per Indiana Department of Revenue, 7% Indiana sales tax will be charged on this auction. (If you are exempt, you can complete a ST-105
You must wait until the auction ends. (Click on the form to complete & email to [email protected])
We will remove sales tax AFTER we receive a completed form.
If you submit a blanket exemption, we can now keep them on file for the calendar year.
miles: 158535, engine: 3.0L, trans: auto, tires: Goodyear 16", Mach audio system, new battery 9/26, runs/drives, includes title, VIN: 1FAHP59S03A217701 ($25.00 Admin & Doc Fee for title paperwork applies. Please allow up to 10-15 business days for titles for be ready)
miles: 78991, engine: V8, trans: auto, bucket seats, power options, factory climate control, NOTE: ran when seller parked in storage several years ago, believe to have wiring issue to battery terminals, VIN: 8K1069487 ($25.00 Admin & Doc Fee for title paperwork applies. Please allow up to 10-15 business days for titles for be ready)
dims: 5’x 8’; ball: 1-7/8”, single axle, GVWR: 2000, tires: 4.80x12, rear fold down ramp, VIN: 4YMBU0812JG029614 ($25.00 Admin & Doc Fee for title paperwork applies. Please allow up to 10-15 business days for titles for be ready)
miles: 18630, V-twin engine, dual exhaust, maroon leather seats with passenger backrest, windshield, Dunlop Cruisemax 150/90-15M/C rear tire, & analog gauges, garage kept, non-running, been in storage for recent years-no attempt to start, include title, VIN: JKBVNAA17KA003501 Note: ($25.00 Admin & Doc Fee for title paperwork applies. Please allow up to 10-15 business days for titles to be ready)
boat kept in storage for several years, includes Minn Kota trolling motor, Johnson 25HP engine, unknown condition, includes titles, Boat VIN: 660830D14, Trailer VIN: MVIN387752IND; Note: ($25.00 Admin & Doc Fee for title paperwork applies. Please allow up to 10-15 business days for titles to be ready)
hours: 562.3, engine: gas, manual dump bed, rear hitch and robust tires for off-road performance, garage kept, been in storage for recent years, no attempt to start, title not included, PIN: W004X2X057044, Buyer to remove and load, NOTE: 9/30 Update: seller has in running condition
engine: 229 CC gas, 2WD, off-road tires, front & rear racks, and headlights. note: rear taillight lens is broken. garage kept, non-running, been in storage for recent years, no attempt to start, includes Certificate of Origin, VIN: 5Y4AG01Y82A073674
features electric start, reverse shaft drive, front and rear racks, and 25x12-9 tires, garage kept, non-running, been in storage for recent years, no attempt to start, title not included, Buyer to remove and load.
miles: 7987, off-road tires, disc brakes, hand guards, rear luggage rack, and analog instrument cluster, garage kept, non-running, been in storage for recent years, no attempt to start, includes owners manual & title, VIN: JKAKLEA1X4DA07991 Note: ($25.00 Admin & Doc Fee for title paperwork applies. Please allow up to 10-15 business days for titles to be ready)
dims: 12’W x 25’L x 9’ H, NOTE: buyer to remove and load within 14 days after auction.
length: 40’; height: 8, door opening: 7’8”w x 7’6”h; must be removed within 14 days of auction (weather permitting)
size: 6, stamped: 14K SMS
length: 7", stamped 10K on clasp
Coca-Cola themed metal sign shaped as a crossing guard with "Slow School Zone" shield, double-sided graphics, and original weighted base embossed with Coca-Cola logos. Measures 5’2” in height. Surface wear and rust consistent with outdoor use. Buyer to remove and load.
dim: 44"X44", featuring the classic red background with white 'Enjoy Coca-Cola' script, Some surface wear and signs of age are visible. Buyer to remove and load.
dim: 11"X12"X4", Includes original cord and mounting hardware. working condition but cord needs replaced, Buyer to remove and load.
Coca-Cola branded round metal thermometer with red and white faceplate, marked "Drink Coca-Cola In Bottles" and "Made In U.S.A. 495A." Glass cover and metal backing with hanging slot. Minor wear on metal rim. Approximate diameter 12 inches.
Chilton Coca-Cola poly-styrene dispenser includes the original box and three branded cups. Trim Molded Products, Aluminum Specialty Co., Manitowoc, WI. Holds up to a 12 oz. bottle. Box shows wear.
This Coca-Cola toy dispenser set includes the original box, four miniature Coca-Cola logo glasses, and features a lever-operated dispensing mechanism. Manufactured by Trim Molded Products Co., Burlington, WI. Box graphics are present.
Red Coca-Cola branded golf bag made by A. Miller Associates, USA. Features multiple zippered pockets, dividers for clubs, and padded shoulder strap. Leather shows wear consistent with use. Buyer to remove and load.
Red leather Coca-Cola branded golf bag by Ron Miller Associates, Inc., made in the USA. Includes a Cygnet putter with Coca-Cola branding and a white head cover. Signs of use and wear visible throughout. Buyer to remove and load.
Large Coca-Cola branded ice chest cooler with dual metal lids and built-in bottle openers. Measures 70 inches long by 31 inches wide by 36 inches high. Interior divided compartments and metal buckets. Buyer to remove and load.
Stanley Model CH5 commercial chipper shredder with 15HP OHV engine and 120V electric start. Accepts wood branches and lumber up to 4 inches. Features heavy-duty handles, large tires, and a steel blade system. Buyer to remove and load, seller states: used twice
Sportsman portable generator with 4000 surge watts and 3500 running watts. Powered by gasoline with a 7.0 HP engine. Features include multiple outlet types, voltmeter, and control. Buyer to remove and load, seller states: never been used
overall length: **, Buyer to remove and load.
Cast iron blacksmith post vise with a long leg for support and mounting bracket. The vise features a hand-forged appearance, large screw mechanism, and mounting hardware. Buyer to remove and load.
cash register featuring multiple numbered and lettered keys, lever operation, and key included. Metal construction with visible signs of age and use. Seller states item is in working condition. Buyer to remove and load.
National brand brass cash register featuring decorative embossed designs and a white marble shelf. Serial number 1262098. Includes multiple currency keys and internal mechanism visible. Some wear and oxidation present. Buyer to remove and load.
Cast iron hand water pump marked Salem, Ohio, with side spout and tall upright design. Buyer to remove and load.
Crystal Metal No. 2 cast iron farm bell with matching yoke and handle. Marked 'USA' and 'Crystal Metal.' Includes chain and pull. Surface rust and wear visible. Approximate bell diameter 13 inches. Buyer to remove and load.
Hart Hardware Co Louisville cast iron bell with mounting yoke. Surface displays significant oxidation and rust. Manufacturer mark is visible on the yoke. Intended for restoration or display purposes. Buyer to remove and load.
Stihl TS 420 handheld concrete cut-off saw with protective blade guard and front handle. Gas-powered design with visible controls and warning labels. Signs of use and wear on the housing and blade cover. Buyer to remove and load.
DeWalt DW705 compound miter saw with a 12 inch blade. Rated at 120V, 13A, 4000 RPM. Saw includes miter and bevel adjustment features and visible wear from previous use. Buyer to remove and load.
Chicago Electric 14 inch cut-off saw with abrasive cutting wheel and integrated base. Features a side handle and adjustable material clamp for stability. Power cord and warning label visible; surface shows signs of prior use. Buyer to remove and load.
qty: 1
qty: 1
One 14-inch electric chainsaw, 120V, 60Hz, 9A, and one Craftsman Bushwacker 18-inch, 21cc gas hedge trimmer. Both tools show signs of previous use. Buyer to remove and load.
Tow-behind Phoenix sprayer featuring a yellow poly tank, hose, boom sprayer attachment, and a mounted Shurflo diaphragm pump (model 8000-543-236). Two pneumatic tires and metal tow bar for transport. Notable signs of wear and residue from prior use visible. Buyer to remove and load.
Craftsman branded snow plow blade attachment measuring 48 inches in width. Includes mounting hardware, handle lever, and electrical wiring. Shows signs of use with surface wear. Buyer to remove and load.
Waterloo steel tool cabinet with seven drawers. Second from the top drawer appears to be stuck. Includes mixed tools inside several drawers. Measures 29 inches wide by 30 inches high by 18 inches deep. Buyer to remove and load.
Wood and metal storage trunk with visible hardware and decorative latches, manufactured by H.A. Winship, Boston, as identified by the interior label. The trunk shows wear and surface marks to the wood and metal hardware. Metal handles are present on the sides. Buyer to remove and load.
Floor loom constructed from wood with metal heddles, crank, and attached accessories. Yarn is wound on the back beam, and various shuttles are present under the frame. The loom shows signs of use and wear. Buyer to remove and load.
Oak wardrobe featuring a single large cabinet with hanging rod, four dovetailed drawers with metal pulls, and an attached mirror above the drawers. Includes a lock with key and towel bar on the wardrobe door. Wear present on finish, especially drawer fronts. Buyer to remove and load. Dimensions are 64 inches high by 38 1/2 inches wide by 20 inches deep.
Carved oak hall tree featuring an oval mirror, brass coat hooks, and hinged storage bench. Overall dimensions are 34 1/2 inches wide by 78 inches high by 17 inches deep. Surface shows minor wear consistent with normal use. Buyer to remove and load.
Wood cabinet featuring two drawers with metal pulls, two paneled doors, a tall back with two vertical supports, and a lower shelf. The cabinet is on small casters and shows surface wear and scuffs. Buyer to remove and load.
Ward's Airline Superheterodyne floor radio, Model 62-173, featuring a wood cabinet with decorative grillwork, analog dial, four control knobs, and 7-tube chassis. Back panel reveals internal components and speaker marked 2091. Buyer to remove and load.
Wood cabinet with two front doors featuring embossed metal panels with fruit basket designs. Measures 27 1/2 inches wide by 32 inches high by 12 1/2 inches deep. The interior has a single shelf and the cabinet has curved top and base edges. Buyer to remove and load.
Stoneware butter churn featuring a cylindrical form with handles on each side. Includes a wooden lid and dasher with a round paddle. Interior is glazed. Buyer to remove and load.
Sanitary Scale Co. mechanical bench scale with dual display windows and an octagonal weighing platform. Features metal construction with white painted finish. Marked Belvidere, Ill. Some surface wear and signs of use are visible. Buyer to remove and load.
Primo PM20 commercial planetary mixer with 20-quart stainless steel mixing bowl, wire safety guard, and standard attachments. Includes dough hook, flat beater, and wire whip. Operates on 110V power, 1.1 kW, single phase. Manufactured June 2017. Buyer to remove and load.